Search results for: 'trscm 2'

Parts List Four 500k pots Two .022 tone caps 1/4" Mono Jack 3-Way toggle switch Wiring kit Dowloads Les Paul Style Wiring Diagram for 2-conductor pickups

1/2" (13mm) This jack rout is compatible with: Deep panel jacks only. 3/4" (19mm) This jack rout is compatible with: Football jack plates. Square jack plates, on bodies with a 3/16" edge radius. This rout it typically used on bodies with a 3/8" or 1/2" edge radius. 7/8" (22mm) This jack rout is compatible with: Electrosockets jack plates. Football jack plates. Square jack plates, on bodies with a 3/16" edge...

Conversion necks are a Warmoth innovation that allow you to easily change the scale length of your 25-1/2" bolt-on guitar to either 24-3/4" (Gibson® length) or 28-5/8" (Baritone length). They work by lengthening or shortening the distance between the bridge saddles and the string nut, and offer an easy and inexpensive way to experience something new on your old Fender®. All Conversion Necks are built using Modern construction . Installing a conversion neck is just as easy as install...

We do our best to ship orders within the time frames listed below. We will contact you if your order is significantly delayed for any reason. Otherwise, your patience is greatly appreciated. We will ship your entire order together once all items have been completed and are in stock.   Hardware and Pickguards In Stock Hardware:  2-3 business days Custom Pickguard:  3-4 business days Guitar & Bass Necks In Stock Not adding paint/finish or alrea...

Guitar Necks Guitar Bodies Bass Necks Bass Bodies Featured In-Stock Guitar Necks Strat® Replacement Neck ...

4-String Bridge Routs Gotoh 201 This rout fits the Gotoh 201 bridge. Shop Gotoh 201 Bridges View Gotoh 201 Rout Diagram The Gotoh 201 bridge rout is our standard rout for P and J style bodies. For top-loading bridges. The ground wire channel is pre-drilled, with a recessed area under the bridge. Also fits Leo Quann BadAss II and Babicz Full Contact 4-string bridges. Schaller 463 This rout fits the Schaller 463 bridge. ...

Top Jack Routs Strat® Top Jack This jack rout is compatible with: Strat® Top jack plates only. Strat® Top Jack w/ Standard Holes This jack rout is compatible with: Strat® Top jack plates only. Includes pre-drilled standard mounting holes. Standard mounting holes fit the Strat® Top jack plates Warmoth sells, as well as the vast majority of other plates, but non-standard jack plates do exist. If you pla...

The width of the nut is a significant factor in determining the feel and playability of your neck. Warmoth offers several different widths, to suit players of all sizes and playing styles. Standard 4 String 1-1/2" (38mm) - J Bass® This is the smallest nut width size and standard for the 4-string J Bass®. Most modern 4 string basses use this width. Our Tele® Bass neck can be ordered in this size. Short scale 32" and 30" bass necks are only available in this nut width. 1-5/8" (41...

Heel and Neck Pocket Dimensions Warmoth adheres to Fender's® USA vintage/original neck heel and neck pocket dimensions on all models (except when noted). Many other manufacturers have adopted these dimensions as well. Unfortunately, they are not universal...even among Fender® products. Careful measurement is the only way to be sure your parts will be compatible. Strat® Neck Pocket Tele® Neck Pocket Strat® / Tele® Heel Dimensions Neck Dep...

Will it fit my Guitar? Will it fit my Bass? How do I order? How long will my order take? Can I request a custom option? Will my body or neck look like the picture? How do I adjust the Truss Rod? How do you finish your Frets? Do you offer Nitro finish? How do I use a Conversion Necks? Will it fit my guitar? All Warmoth guitar replacement parts adhere to Fender's® vintage/original 2-3/16" neck pocket and heel dimensions. This means our pa...

The Controls option allows you to add holes for certain controls on lower area of the pickguard. Volume 1 This option lets you add the hole for a potentiometer. Location will vary by pickguard model. Delonge Mod for Volume 1 This option moves the Volume 1 control hole further away from the pickup, so that it does not obstruct the picking hand. Selecting this mod will automatically disable Volume 1. To re-select Volume 1, first uncheck the Delonge mod. Volume 2 This option lets you a...

Fretboards are curved across their width to accommodate the natural shape of fingers in playing position. Some are curved a great deal, while others feel almost flat. The amount of a fretboard's curvature is referred to as its radius. Fretboards with a small radius are more curved, while those with a large radius are more flat. The measurement is arrived at by extending the arc of the fretboard to form an imaginary circle around the neck. The radius of this circle is the fretboard's radius. ...

Warmoth bass parts adhere to Fender's® vintage/original neck-heel and neck-pocket dimensions, except when noted. Many other manufacturers also use these specs, but they are not universal - even among Fender® products. Accurate measurement is the only way to ensure compatibility of parts. 4-String Bass Necks 4-String Bass Neck Pocket 4-String Heels (20 & 21 Frets) J Bass® and P Bass® heels and neck pockets have the same measurements and are intercha...

Warmoth bass parts adhere to Fender's® vintage/original neck-heel and neck-pocket dimensions, except when noted. Many other manufacturers also use these specs, but they are not universal - even among Fender® products. Accurate measurement is the only way to ensure compatibility of parts. 4-String Bass 4-String Bass Neck Pocket 4-String Heels (20 & 21 Frets) J Bass® and P Bass® heels and neck pockets have the same measurements and are interchangeable: ...

Use the wiring diagrams below to assist you in the wiring of your guitar or bass.  Fender-style wiring S/S/S (Strat® Style) T/x/T (Tele® Style) S/S/H H/x/H with Coil Splitting Robbie Robertson style Gibson-style wiring H/x/H (2-conductor) H/x/H (4-conductor) Two P-90's Other wiring Warmoth Meadowhawk Bass P Bass® Style J Bass&reg...

All packages require a contact name, complete street address (including apartment, suite or unit number if applicable), and telephone number. This is necessary to facilitate fast and easy Customs clearance. Shipping Methods UPS Worldwide Saver Transit Time: 1-3 business days. Door-to-door service with UPS Customs clearance. If you need it fast, this is the one to choose. Fully insured against damage, loss, or theft. Online tracking service. UPS Quantum View notification ...

Tuner bushings from different manufacturers are not always identical in size. If the tuner bushings you are using don't fit into the tuner routs fairly easily do not force them. It is necessary to open the hole up slightly. Headstocks broken as a result of forcing bushings into them are not covered under warranty. Tuner Reams Gotoh GB7 (9/16" - 14mm) Our standard bass tuner hole size. Shop Gotoh GB7 Tuners Schaller BM (11/16" - 17.5mm) Fit...

Solid Colors .09 Black Solid Gloss Solid vinyl material, with a gloss finish and beveled edge. .06 Black Solid Gloss Solid vinyl material, with a gloss finish and squared edge. .09 Black Solid Matte Solid vinyl material, with a matte, non-reflective finish and beveled edge. .06 Black Solid Matte Solid vinyl material, with a gloss finish and squared edge. .09 White Solid Gloss Solid vinyl material, with a gloss finish an...

Warmoth drills holes to fit the most common pots and switches: Volume and tone control holes are 3/8" in diameter. This size fits most volume, tone, and blend pots. Toggle holes are 1/2" in diameter. This size fits the standard LP-style toggle switch. Blade Switch holes fit any standard 3-way or 5-way Strat®-style blade switch. We do not drill for mini-toggle switches (1/4"). We do not drill control holes in custom locations. Different bodies use different cont...

Bass Body Control Layouts Warmoth drills holes to fit the most common pots and switches: Volume and tone control holes are 3/8" in diameter. This size fits most volume, tone, and blend pots. Toggle holes are 1/2" in diameter. This size fits the standard LP-style toggle switch. Blade Switch holes fit any standard 3-way or 5-way Strat®-style blade switch. We do not drill for mini-toggle switches (1/4"). We do not drill control holes in custom locations. ...

H1 - Header 1 H2 - Header 2 H3 - Header 3 H4 - Header 4 H5 - Header 5 H6 - Header 6 P - Paragraph Bold Style P - Paragraph Italicized Style Links Primary Button Secondary Button Inline Links Lists Unordered List: Nullam quis risus eget urna mollis ornare vel eu leo. Integer posuere erat a ante venenatis dapibus posuere velit aliquet. Vivamus sagittis lacus vel augue laoreet rutrum faucibu...

On a scalloped neck the fretboard is sanded to a concave shape between each of the frets. This increases clearance and reduces friction between fingers and fretboard, making bends and lead techniques quicker and easier. Scalloped fretboard users include Yngwie Malmsteen, Steve Vai, Ritchie Blackmore, and John McLaughlin. Scallops are available on  Modern construction 25-1/2" scale  and  Gibson®-Scale conversion  guitar necks only. Warmoth offers two scallop configurations: ...

No Combined Shipments Every order you place will be shipped separately.  If you wish to keep shipping charge to a minimum, you must make sure all the items you want are on a single order when you place it. No Split Shipments Every order will be shipped out in its entirety when all items are complete. If you would like in-stock items to ship before custom items, you must place them on separate orders. Order Change Terms & Fees Order changes will delay your order significan...

Warmoth offers several neck construction types to suit any taste or playing style: Vintage Construction The Vintage replacement neck features a single truss rod with adjustment at the heel, similar to Fender's early Strat® and Tele® necks. They offer a true vintage playing experience. Learn More Adjustments The adjustment nut on Vintage necks is accessible at the heel. To adjust the truss rod the neck must be removed. Stability Vintage necks use a single truss rod desi...

The Neck Profile is the contour or grip shape of the neck, and is important for optimum playability and hand comfort. To determine which works best for you compare the dimensions below (measured from the face of the fretboard to the back of the neck) to those of your favorite neck. 4-String Neck Profiles Standard Similar to: Modern Fender J Bass® or P Bass® Thickness at 1st Fret: .872" (22mm) Thickness at 12th Fret: .975" (25mm) The Standard Profile is our most popu...

Warmoth's Unique Choice section allows you to browse our stock of premium fretboard blanks and choose the exact piece of wood Warmoth will use when building your custom neck. No guesswork or blind purchases. You'll know exactly what you're getting from the start. How to Purchase To purchase, just add the Unique Choice fretboard you want to your cart. (A Universal Size fretboard is required for bass necks. See the sizing information below.) Then use the custom builders to spec out the neck you ...

Warmoth's Unique Choice section allows you to browse our stock of premium fretboard blanks and choose the exact piece of wood Warmoth will use when building your custom neck. No guesswork or blind purchases. You'll know exactly what you're getting from the start. How to Purchase To purchase, just add the Unique Choice fretboard you want to your cart. (Be sure to follow the sizing guidelines below.)  Then use the custom builders to spec out the neck you want it used on, and choose "Unique Cho...

Heel and Neck Pocket Dimensions Warmoth adheres to Fender's® USA vintage/original neck heel and neck pocket dimensions on all models (except when noted). Many other manufacturers have adopted these dimensions as well. Unfortunately, they are not universal...even among Fender® products. Careful measurement is the only way to be sure your parts will be compatible. Strat® Neck Pocket Tele® Neck Pocket Strat® / Tele® Heel Dimensions Neck...

Tremolo Bridge Routs 6-Hole Vintage Tremolo This rout fits the 6-Hole Vintage Tremolo unit. Shop 6-Hole Vintage Tremolos View Bridge Rout Diagram Mounting screw span is 2.2" (55.9mm) Mounting screw hole diameter: 1/8" (3mm). Gotoh 510 Tremolo This rout fits the Gotoh 510-TS-FE1 Tremolo unit. Shop Gotoh 510 Tremolos View Bridge Rout Diagram This rout also fits the Wilkinson 1302P tremolo, but you must use t...

Privacy and Security Policy This Privacy Policy discusses what information Warmoth Guitar Products, Inc. collects and how Warmoth Guitar Products, Inc. uses it. By using the Warmoth.com site, you agree with the terms and conditions of this Privacy Policy. Information Warmoth collects When you visit the Warmoth.com website, Warmoth receives and collects certain information depending on what you do and how your browser security is set. * Information Collected Automatically:...

Warmoth Guitar Products, Inc. provides you services of Warmoth.com subject to the following conditions. If you visit or shop at Warmoth.com, you accept these conditions. Please read them carefully. Privacy/Security Please review our Privacy and Security Policy , which also governs your visit to Warmoth.com. Electronic Communications When you visit Warmoth.com or send emails to us, you are communicating with us electronically. You must agree to receive communications from us electronically. ...

Limited Warranty Warmoth Guitar Products, Inc. warrants its necks and bodies to be free from defects in materials and workmanship under normal use and service for the periods listed below: 2 Year Warranty Necks hard finished by Warmoth. Roasted Maple necks. Exotic* wood necks. Guitar & Bass Bodies. 1 Year Warranty Necks that are hard finished competently by customers within 30 days of receiving product. * Exotic neck woods include, Ebony,...

Part of the beauty of wood is the uniqueness of each piece. There are wide ranges of color, striping, streaking, figure size, interval, etc. Our pictures are for general reference only. If you have specific appearance expectations, please contact our Customer Support team by emailing [email protected] or calling (253) 845-0403 to determine availability and price. Alder -  Alnus rubra Alder is used extensively for bodies because of its lighter weight (...

Part of the beauty of wood is the uniqueness of each piece. There are wide ranges of color, striping, streaking, figure size, interval, etc. Our pictures are for general reference only. If you have specific appearance expectations, please contact our Customer Support team by emailing [email protected] or calling (253) 845-0403 to determine availability and price. Alder -  Alnus rubra Alder is used extensively for bodies because of its lighter weight (...

Warmoth Guitar Products 10013 160th Street East Puyallup, WA 98375 USA We do not offer walk-in retail services at this time. Our Customer Service department is available: Monday – Friday 8:30AM to 4:30PM Pacific Standard Time. Phone:   (253) 845-0403 Fax:  253-848-2415 (24 hours) Email:   [email protected] Report website problems:  [email protected]

We require a miniumum order amount of $25 for shipping. Standard Shipping Methods UPS Ground Default shipping method used for domestic addresses Cannot be used for P.O. Boxes, APO/FPO Boxes, Alaska, Hawaii, and US Territories (Puerto Rico, US Virgin Islands, Guam, etc.) USPS Used for P.O. Boxes, APO/FPO Boxes, Alaska, Hawaii, and US Territories (Puerto Rico, US Virgin Islands, Guam, etc.) Can be specified as preferred shipping method during checkout For orders totalin...

If you are not completely satisfied with our products, you may return them for a refund or exchange subject to the following terms and conditions: All returns must be accompanied by a valid Return Authorization Number (RA#). Call us at 253-845-0403 or email us at  [email protected]  to obtain an RA#. Please be ready to provide an order or invoice number. All RA#'s must be issued within ten (10) business days of receiving the product , (or within 30 days for purchases of C...

Warmoth Guitar Products is a family owned and operated business located in Puyallup, WA, USA. We are the largest manufacturer of quality custom guitar and bass parts in the US for over 40 years. We love guitars and our customers love them too! What we offer Monday – Friday Full-time hours Competitive Wage A benefits package that includes: medical, paid dental, vision and life insurance, paid holidays, vacation, sick leave, and employee discounts. We are always on the lookout f...

Binding is a decorative material affixed to the edge of a fretboard to give it a classy look. Warmoth offers neck binding in six materials. Want to see what binding will look like on your neck? Explore  binding and inlay combinations  here. White Neck Binding Black Neck Binding Cream Neck Binding Ivoroid Neck Binding Pearloid Neck Binding Tortoise Neck Binding Tortoise binding is translucent and looks best over light woods. ...

Warmoth makes bass bodies using three different constructions: Solid, Chambered, and Hollow. Not every construction is available on every body style. The sections below explain each construction in more detail. Solid Bodies Solid bass bodies are built with a solid wood core. A Lam Top may also be used, but is not required. A Lam Top is optional on solid bodies Solid 51 P-Bass® Replacement Body Solid Deluxe 5 J-Bass® Replacement Body with Lam Top Chamb...

Standard Neck Finishes Warmoth offers four standard neck finishes. Prices vary depending on fretboard and shaft wood combinations. Clear Gloss Clear Satin Nitro Vintage Tint Gloss Vintage Tint Satin Nitro Warmoth will only apply a finish to necks with frets already installed, or fretless necks. If you select "No Frets - Slots Only" the Finish option will not be available. On maple necks with maple fretboards the entire neck is finished including the...

Warmoth offers a range of fret sizes and materials to suit every player. Use the information below to determine the fret wire that works best for you. Fret Sizes and Shapes Compared The dimensions posted for each fretwire are the most accurate indication of size. The Dunlop numbers added in parenthesis are an approximate reference point only. The actual dimensions of the fretwire we receive may vary slightly from batch to batch. Medium Jumbo Narrow (6105) and Medium Jumbo Wide (6...

A headstock veneer is a thin wood laminate (about .030" or 1mm) that is applied to the face of a headstock, usually to match body's LamTop. The result is a beautiful boutique look. They can be ordered by emailing [email protected] or calling (253) 845-0403. Prices will vary depending on neck wood and other factors. Headstock veneers are available on Modern and Modern Tiltback Construction Necks only. Headstock veneers are not available on Paddle...

The Neck Profile is the contour or grip shape of the neck, and is important for optimum playability and hand comfort. To determine which works best for you compare the dimensions below (measured from the face of the fretboard to the back of the neck) to those of your favorite neck. Standard Neck Profiles Standard Thin Similar to: Modern Fender® American Standard Strat® or Tele® Thickness at 1st Fret: .800" Thickness at 12th Fret: .850" The Standard Thin is our mo...

21 vs. 22 Frets Fender's® original Strat® and Tele® necks had 21 frets, while Gibson® necks had 22. In order to bring this extra range to Fender®-style models, we created replacement necks with a 22nd fret on a short fretboard extension. Standard 22 Fret Fretboard extends 1/4" beyond neck heel. A 1/8"(3mm) space between the fretboard overhang and the top of the body leaves enough room for a standard thickness pickguard. Switching from a 21 to 22 fret neck usua...

The width of the nut is a significant factor in determining the feel and playability of your neck. Warmoth offers several different widths, to suit players of all sizes and playing styles. Nut Widths 1-5/8" (41mm) - Narrow This is the smallest nut width. It is very comfortable for fingering chords and playing rhythm. 1.650" (42mm) - Vintage Medium This width is considered "vintage" spec. It is very comfortable for fingering chords and playing rhythm. 1-11/16" (43mm) - Modern Medium...

If you want Warmoth to install a String Nut on your neck you must first choose a fret option. If you select "No Frets - Slots Only" the String Nut option will not be available. Cut and Installed String Nuts Cutting the nut is one of the most challenging steps in setting up a guitar neck. Let Warmoth do this work for you. We custom-cut every nut to account for the fret height, string spacing, and fretboard radius of the neck, which translates to smooth action and great playability. ...

Truss rods help wooden guitar necks withstand the constant tension of steel guitar strings. They are also adjustable, allowing players to change the curvature of their neck for the best playing action. Truss rods generally fall into two categories: the Vintage Single style and the Modern Double style. Both are available from Warmoth. Vintage Single Truss Rods The vintage style truss rod consists of a single steel rod that is held in a bowed position within the neck. One end is anchored within ...

Our standard tuner holes are an 11/32" straight bore. This matches up to the push-in grommets of the standard Vintage Style tuners (some copies may be different). When you purchase a new Warmoth gutiar neck, we can ream our counter-bore the tuner holes to any of the sizes listed below, at no additional charge. Tuner bushings from different manufacturers are not always identical in size. If the tuner bushings you are using don't fit into the tuner routs fairly easily do not force them. It is ne...

From plain white Maple to colorful tropical exotics, we offer a rainbow of musical instrument woods. There is no one "best" wood. The choice you make should be based upon your application and personal taste or preference. Part of the beauty of wood is the uniqueness of each piece. There are wide ranges of color, striping, streaking, figure size, interval, etc. all varied by the touch of nature. Our pictures are for general reference only. If you have specific appearance expectations, please con...

Warmoth makes guitar bodies using three different constructions: Solid, Chambered, and Hollow. Not every construction is available on every body style. The sections below explain each construction in more detail. Solid Bodies Solid guitar bodies are built with a solid wood core. A Lam Top may also be used, but is not required. A Lam Top is optional on solid bodies Solid Soloist Body Solid Strat® Replacement Body Solid Tele® Custom Replacement Body with La...

Color Choices Choose a paint swatch to see an image of a guitar body in that finish color. Browse through the dropdown categories for ideas to customize your guitar body order. Paint Finish ...

Strat®-style Pickup Routs On  top-rout   Strat®-style bodies , the pickup routs and the control rout are interconnected, and ordered as one. Standard Rout S-S-H Rout H-S-H Rout Universal Rout Reverse Angled Rout Depth of rout is 3/4" (19.05mm)* Pickups are typically mounted from a pickguard. *On Vintage Strat® replacement bodies, pickup rout depth is shallower: 5/8" (15.9mm). Shop Strat® Pick...

Neck Binding Options Binding is a decorative material affixed to the edge of a fretboard to give it a classy look. Warmoth offers neck binding in six materials. Want to see what binding will look like on your neck? Explore binding and inlay combinations here. White Neck Binding Black Neck Binding Cream ...

Standard Neck Finishes Warmoth offers four standard neck finishes. Prices vary depending on fretboard and shaft wood combinations. Clear Gloss Clear Satin Nitro Vintage Tint Gloss Vintage Tint Satin Nitro Warmoth will only apply a finish to necks with frets already installed, or fretless necks. If you select "No Frets - Slots Only" the Finish option will not be available. On maple necks with maple fretboards the entire neck is finished including the...

Warmoth offers a range of fret sizes and materials to suit every player. Use the information below to determine the fret wire that works best for you. Fret Sizes and Shapes Compared The dimensions posted for each fretwire are the most accurate indication of size. The Dunlop numbers added in parenthesis are an approximate reference point only. The actual dimensions of the fretwire we receive may vary slightly from batch to batch. Medium Jumbo Narrow (6105) and Medium Jumbo Wide (6...

A headstock veneer is a thin wood laminate (about .030" or 1mm) that is applied to the face of a headstock, usually to match body's LamTop. The result is a beautiful boutique look. They can be ordered by emailing [email protected] or calling (253) 845-0403. Prices will vary depending on neck wood and other factors. Headstock veneers are not available on Paddle Head Necks, or any neck that is already finished. If you have questions about headstock ve...

Warmoth offers 20, 21, and 24 fret bass necks on our standard bass neck models. Our 21 and 24 fret over hung fretboard is a direct replacement for 20 fret Fender® bass necks. No modifications are necessary. The fretboard simply extends over the pickguard. Standard 21 Fret Fretboard extends 1/4" beyond neck heel. A 1/8"(3mm) space between the fretboard overhang and the top of the body leaves enough room for a standard thickness pickguard. Switching from a 20 to 21 fret neck usual...

If you want Warmoth to install a String Nut on your neck you must first choose a fret option. If you select "No Frets - Slots Only" the String Nut option will not be available. String Nuts Traditional Nuts: Pre-cut and Installed The string nut dictates both the spacing of the strings and their height above the frets, and must be cut to the specific dimensions of the neck it will be used on. We have built a system for precision cutting and shaping, done by a bench-top CNC m...

Warmoth short scale bass necks offer an easy playing experience with big tone and vibe. Our SSB necks are available in both 30 and 32 inch scale lengths. The lower string tension and shorter reach make it a breeze to play. Fret hand position is super comfortable, and it is easy on shoulders and backs. Warmoth SSB necks are built with all the craftsmanship and attention to detail Warmoth is famous for. Benefits: Classic 4-tuner hole headstock configuration. Shortened reach aids balance an...

From plain white Maple to colorful tropical exotics, we offer a rainbow of musical instrument woods. There is no one "best" wood. The choice you make should be based upon your application and personal taste or preference. Part of the beauty of wood is the uniqueness of each piece. There are wide ranges of color, striping, streaking, figure size, interval, etc. all varied by the touch of nature. Our pictures are for general reference only. If you have specific appearance expectations, please con...

Color Choices Choose a paint swatch to see an image of a guitar or bass body in that finish color. Browse through the dropdown categories for ideas to customize your guitar body order. Paint Finish ...

Pickup routs on most models are ordered individually, and may be mixed and matched. Not every pickup rout is available on every body style, or in every position. See individual body models for details. 4-String Pickup Routs Jazz® 4-String Bridge (3-3/4") This rout fit most standard J Bass® 4-string bridge pickups. Shop J Bass® Pickups View Rout Diagrams Depth of rout is 3/4" (19.05mm) This bridge position rout is slightly wider than the Jazz® 4-...

The 24 Fret Reposition option repositions the neck pickup rout towards the bridge. If you plan to use a 24-fret neck with your body, this option is necessary to accommodate the extended fretboard. 24 Fret Reposition of Neck Pickup Rout

7-String bodies are available in two scale lengths: 25" scale 28-5/8" Baritone scale Choose that scale the matches the neck you plan to use. Neck and body scales cannot be mismatched.

What are Deep Cuts? After more than four decades it's no surprise that Warmoth's biggest hits are our Strat® and Tele® replacement parts. But true Warmoth fans know the guitar and bass parts that best define us are the deep cuts. That's where you'll find the limited runs, special collections, and anniversary models that show off our innovation, creativity, and passion for building the best guitar parts on the planet. Last Waltz Tribute bodies Purple Tributes ...

In 2016 Warmoth did this very small run to honor the Purple One and his iconic guitar. Each body featured a figured maple laminate on both front and back, and double tortoise binding, and included a yellow tortoise pickguard and bridge surround. PT6055 PT6056 PT6057 PT6048 PT6058 PT6059 PT6060 ×

Warmoth commemorated our 40th anniversay in 2020 by releasing a limited run of two fully-built guitars. Both guitars were original designs and featured the best components and materials throughout, including fully-sculpted heel joints, "ghost-tang" fret installation, highly figured lam tops, matching headstock lams, quartersawn Roasted Maple necks, Gotoh and Hipshot bridges, and Bare Knuckle pickups. Though we origninally planned to release 40 guitars - 20 of each - our plans changed with the arrivia...

PS15021 PS15023 PS15022 PT8457 PS15019 PS15027 PT8464 PT8454 PS15036 ×

PS15386 PS15390 PS15383 PS15387 PS15389 PS15384 PS15385 PS15388 SN28661 SN28651 SN28652 SN28653 SN28654 SN28659 SN28655 SN28660 SN28658 ×

SLP463 PS14101 PS14102 PT7795 SLP461 PS14106 PT7778 PS14095 PS14094 SLP462 PS14096 PT7794 BP3897 J Bass® Replacement Neck BP3898 PS14097 PS14100 PT7776 PS14131 PS14099 PS14098 ×

Warmoth's Unique Choice section allows you to browse our stock of premium lam tops and choose the exact piece of wood Warmoth will use when building your new bass body. No guesswork or blind purchases. You'll know exactly what you're getting from the start.  How to Purchase To purchase, just add the Unique Choice item you want to your cart. (A Universal Size lam top is required for bass bodies. See the sizing information below.) Then use the custom builders to spec out the body you want i...

"Rainbow Claro?" It was a truly breathtaking and beautiful batch of wood that we reserved for this 2024 limited run of body and neck sets. At the shop we had taken to calling it “Rainbow Claro” because of the colorful vertical stripes within the flamed figuring. Claro Walnut Tele® Replacement/Warhead sets Claro Walnut Strat® Replacement Bodies Claro Walnut Soloist/Warhead Sets Claro Walnut Strat® Replacement/Warhead Sets Wa...

Warmoth's Unique Choice section allows you to browse our stock of premium lam tops and choose the exact piece of wood Warmoth will use when building your new guitar body. No guesswork or blind purchases. You'll know exactly what you're getting from the start.  How to Purchase To purchase, just add the Unique Choice lam top you want to your cart. (Be sure to follow the sizing information below.) Then use the custom builders to spec out the body you want it used on, and choose "Unique Choice"...

Parts List Three 250k pots 5-Way Blade Switch 1/4" Mono Jack .047 tone cap Downloads Stratocaster® Style Wiring Diagram

Parts list 3-way Switch Two 250k pots .047 tone cap 1/4" Mono jack Wiring kit Downloads Telecaster® Style Wiring Diagram

Parts List Four 500k pots Two .022 tone caps 1/4" Mono Jack 3-Way toggle switch Wiring kit Downloads Les Paul Style Wiring Diagram for 4-conductor Pickups The pickup wire colors in this diagram are for Seymour Duncan pickups. If you are using another brand of pickups be sure to check their color codes.

Parts List Three 500k pots Two treble bleed caps .022 tone caps 1/4" Mono Jack 3-Way toggle switch Wiring kit Downloads Warmoth Meadowhawk Wiring Diagram The pickup wire colors in this diagram are for Bare Knuckle pickups, which the Meadowhawks originally came with. If you are using another brand of pickups be sure to check their color codes.

Parts List Three 250k pots 1/4" Mono Jack .047 tone cap Wiring kit Downloads J Bass® Style Wiring Diagram

Parts List Two 250k pots .047 tone cap 1/4" Mono jack Wiring kit Downloads P Bass® Style Wiring Diagram

Parts List Two 250k pots One 500k pot 5-Way Blade Switch 1/4" Mono Jack .047 tone cap Downloads SSH Wiring Diagram for 4-conductor Pickups The pickup wire colors in this diagram are for Seymour Duncan pickups. If you are using another brand of pickups be sure to check their color codes.

Pacific Northwest Spalted Maple Collection In 2025 we offered this limited run of stunning Spalted Maple lam-tops, all harvested from our home here in the Pacific Northwest.  The spalt and flame patterns were infused with colored acrylic accents, giving each body a look as unique as a fingerprint.   To honor their lineage we named each one after an interesting Northwest place.   Chinook Elwah Dungeness Hoh Kalaloch ...

The information on this page can be used to roughly date discontinued Warmoth products. Dinky P Carved Top The Dinky P Carved Top bass body was discontinued in 2019. 8-String Bass Neck The 8-String bass neck was discontinued in 2019. SSB G3 Bass Body The SSB G3 bass body was in production from 2014 to 2018. Regal Neck The Regal neck was in production from 2013 to 2015. Royale...

Marbled Padouk Limited Run In July of 2025 we offered this limited run of stunning Marbled Padouk. Dramatic streaks of cream and cinnamon are what make Marbled Padouk such a rare and prized wood. This limited run included bodies with Marbled Padouk lam tops, and necks with Marbled Padouk headstock lams or fretboards. × ...

For Thanksgiving of 2025 Warmoth served up a smorgasbord of delicious flake finishes that were truly a feast for the eyes! The limited run featured twelve delicious flavors, all shown below.   There were no leftovers.   The Cranberries Sauce Deep Blue Stuffing Fleetwood Mac & Cheese Green Day Casserole Mudhoney Ham Pearl Yam Rage Against the Cuisine Smashing Pumpkin Pie Soundgarden Salad ...

Parts List Three 250k pots 3-Way Blade Switch 1/4" Mono Jack .022 tone cap Downloads Robbie Robertson Style Wiring Diagram

In February of 2026 Warmoth released the Last Waltz Limited Run to honor Robbie Robertson's iconic guitar. The limited run featured Vintage Strat®-replacement bodies in two unique finishes. A few were  bronzed at the same bronzery Robbie's Robertson's was, and the rest featured Warmoth's exlusive "Dirty Penny" finish. Each bronzed body also included a Migas Touch Robbie Robertson Loaded Pickguard, an incredibly detailed reproduction of the original. The "Dirty Penny" bodies came...

In 2026 Warmoth released a limited run of fully-built Meadowhawk guitars. Each one was named for a particular variety of dragonfly. The bodies featured a dramatic "two-step top" made of 5A Quilt Maple on a Mahogany core. The necks were Quartersawn Roasted Maple with an Indian Rosewood fretboard, and featured our unique Eclipsed Block inlay pattern and ghost-tang fret install. Other appointments included a set of Bare Knuckle "Crawler" humbuckers, Gotoh locking tuners, and a Hipshot hardtail bridge. ...

Pacific Northwest Spalted Maple 2.0 In 2026 we offered a second limited run of stunning Spalted Maple lam-tops, all harvested from our home here in the Pacific Northwest. The spalt and flame patterns were infused with colored acrylic accents, giving each body a look as unique as a fingerprint. PS-16807 PS-16808 PS-16809 PS-16810 PS-16812 PS-16813 PS-16814 PS-16815 PS-16816 PS-16817 PS-16818...

Parts List Two 250k pots .047 tone cap 1/4" Mono jack Wiring kit Downloads Musicman Style Wiring Diagram

George Harrison-style Rosewood Tele® Replacement Bodies In 2026 Warmoth presented a limited run of Telecaster® replacement bodies, built as a tribute to the most famous Rosewood guitar of all time!  Each body featured beautifully grained solid Rosewood on the top and back, and a thin accent line of Maple sandwiched down the center. They were also chambered for weight relief and routed for all the most popular options. ...